Latest posts

Wind blade repair: how to rebuild material damage

Wind blade repair: how to rebuild material damage

03/06/2020

Wind blades are exposed during their useful life to damages that may
compromise efficient operation. Its maintenance and periodic inspection is
key to detect incidents of any kind. The reasons for the repair of wind blades
(surface damage) can be caused by:

  • Lightning and bird impact

  • Cracks and fissures due to the effect of ice and wind

  • Blade Edge Opening

  • Lightning range

  • wear itself over time

The two main reasons why they should be repaired are: avoid generating
losses in the production of kilowatts in the wind turbine and prevent
erosion, fatigue and wear of materials can go further.

Options to repair blades of a wind turbine


What would be the best option for the repair of wind blades and why? The main option used for the repair operations of the surfaces of the wind blade is the sanding with a portable roto- orbital machine, which allows to easily repair damaged areas during work at height. The weight of this type of sanders ranges between 800 and 1200 grams.

Necessary machines for the repair of wind turbine blades

The portable roto-orbital (electric) sanders are suitable for the repair of wind blades. It is convenient to have a speed regulator to adapt the speed of the abrasive disc to sanding operations (8,000 rpm for roughing work and between 10,000-12,000 rpm for intermediate sanding and finishing work).The abrasives normally used for surface recovery work are abrasive discs with paper or film support.

For rough sanding, ceramic ore disks are usually used for greater abrasive starting and performance, while for intermediate or finishing work discs with aluminum oxide ores are used. The most common grains are gr. 80, 120, 240 and 320.

Read on: How to sand metal: keys, tips and solutions

How is the wind blade repair process

We can differentiate three clear steps for the repair of wind turbine blades.

1. Surface cleaning

The first step is to perform a good cleaning of the surface to eliminate fats, insects, pollen,
fungi and to visualize the true state of the surface. This cleaning is done by spraying special
chemicals that do not damage the molecular structure of the coating.


2. Identification of damages

Next, the existing damages in the coating are identified and analyzed, such as small holes(called lentils), cracks, rubs, cracks in the joints, corrosion, etc.


3. Repair

Depending on the severity of the damage and the layer or layers affected, we will perform some of the following repairs:

  • Sand to remove the paint layers from the damaged part and chamfer the edges with an abrasive disc of 80-120 grain

  • Fill and putty the affected areas

  • Outline the contour and sand the putty to flatten the surface with an abrasive disk of
    grain 80-120

  • Apply the cap pores

  • Sand the filling of the pores with an abrasive disk of grain 120-240

  • Apply the topcoat

  • Sand the topcoat with an abrasive disc of grain 120-320

  • Apply exterior paint

You may be interested: Learn to choose tools for wood according to your needs

Safety measures for the maintenance of wind turbines The safety measures to consider during repair-sanding work are:

  • The use of safety glasses for eye protection that prevent any particle from damaging
    the eyes.

  • The use of a nasal mask to protect the respiratory tract from suspended dust
    generated during sanding.

  • The use of protective gloves to reduce vibration and avoid cuts and chafing.



Why repair wind blades with Abracom abrasives?


Abrasive discs are the main product used to repair wind blades. Abracom is a specialized manufacturer:

  • Import and punch jumbo rolls of sandpaper with velcro to transform them into discs
    and abrasive sheets

  • It has all formats of discs and sheets for all sanders on the market.

  • It has a very wide range of abrasives with different supports: flexible papers, rigid papers, polyester film, abrasive mesh, etc.

It also offers a high diversity of mineral types: ceramic, zirconium, aluminum oxide and silicon carbide to be able to sand each material with the most suitable abrasive. The high added value of Abracom products makes it a fast, flexible and competitive supplier for all levels of consumption.

If you need advice to acquire your abrasives do not hesitate to contact us or download our catalog to know our products.

TOP